Stainless steel is a type of alloy steel, resistant to corrosion due to chromium content - 12% or more. In the presence of oxygen, chromium oxide is formed, which creates an inert film on the steel surface, which protects the entire product from adverse effects. The modern market can offer a variety of stainless steel grades for use in a wide variety of industries.

 

AISI 304

In demand in all industries, the most in demand in food production. It is easy to weld, shows high characteristics of corrosion resistance in aggressive environments. Applications in the chemical, pharmaceutical, petroleum and textile industries.

 

AISI 316

316 stainless steel is obtained if molybdenum is added to 304 stainless steel, which further increases the corrosion resistance and ability to preserve properties in corrosive acid environments, as well as at high temperatures. This stainless steel is more expensive than 304, it is used in the chemical, oil and gas and shipbuilding industries.б

 

AISI 316T

This grade stainless steel contains a small amount of titanium increases the strength of the material, making it resistant to high temperatures, as well as chlorine ions. Used in welded structures, for the manufacture of blades of gas turbines, in the food and chemical industries. Affordable price and high specifications make this stainless steel very popular.

 

AISI 321

Stainless steel, the characteristics of which are due to the high content of titanium. Easy to weld, resistant to temperatures up to + 800oC. It is widely in demand for the manufacture of seamless pipes, as well as pipeline fittings - flanges, tees, bends and transitions.

 

AISI 430

It is stainless steel with a high percentage of chromium and low - carbon. This ratio contributes to high strength and at the same time plasticity. AISI 430 is well bent, welded, stamped. It retains its properties in corrosive and sulfur-containing environments, it is resistant to sharp temperature changes. Used in the oil and gas industry, as well as as a decorative material for the decoration of buildings and premises.

 

AISI 201

Stainless steel grade AISI 201 is much cheaper than similar in the properties of stainless steel of other series. In it, expensive nickel is partially replaced by manganese and nitrogen. Favorable balanced chemical composition makes the characteristics of AISI 201 stainless steel not inferior to AISI 304 and AISI 321. It has found its application in the medical and food industries. It is also used in the manufacture of round and profile pipes, which are required for the creation of handrails, handrails and fences.

Our advantages
High quality products
System of continuous improvement is implemented at the company's enterprises.
Safety engineering
Group of actions of technical and organizational nature, oriented to creation of safe working conditions and prevention of accidents at work
Great experience
WUTMARC increases sales in strategic markets annually.
Quality control
Quality control is the main factor in the development of production WUTMARC. The factories of the company are equipped with modern equipment, which allow to control the quality of products at all stages of production.
One of the company's competitive advantages is the willingness to consider the special requirements of customers - at chemical composition, production technologies, marking and other requirements.
news
30 December 2017
Replacing your everyday gas guzzler with a hydrogen-fueled car could drastically reduce your carbon footprint. So why don't we all make the switch? One of reason is the expensive platinum catalyst required to operate hydrogen fuel cells efficiently.
29 August 2017
India's crude steel production grew 3.5 per cent to 8.36 million tonnes (MT) in July this year, says the latest report by World Steel Association.
25 August 2017
Backed by strong demand from China, flat steel producers who raised prices at the beginning of August by up to Rs 3,000, one of the steepest in recent times, are mulling an increase next month.
22 August 2017
SA’s steel production recovered by 7.6% in July to 493,000 tons from June’s 458,000 tons, but this still left steel output down 6.3% from a year ago, according to the World Steel Association.
17 November 2017
Working on the Ariel Hipercar project, Powdertech Surface Science has developed a process, that uses no adhesives, for bonding polypropylene glass fibre composite to aluminium for the vehicle’s monocoque chassis.
10 Martha 2018
As it did for many businesses, the Great Recession exposed Maysteel’s weakness. But today the Wisconsin custom fabricator has a renewed focus and is again on the growth path.
04 January 2018
Copper was trading in a tight range during Asian trading hours on Thursday January 4 amid mixed market sentiment following the release of the Federal Open Market Committee (FOMC) minutes overnight.
our branches