Non-ferrous metals are the most expensive and valuable technical material.

Copper. It has a characteristic reddish color, in nature it occurs in the form of sulfur compounds, in oxides and very rarely in pure form. The purest copper - contains 99.99% copper and 0.01% impurities. Due to its high plasticity, copper is well processed by pressure in the cold and hot state. It has good electrical conductivity. Copper is made of conductors of electric current - wires and cables.

Tin. Tin is a very soft metal of silvery-white color with a yellowish tinge. The purest tin - containing 99.999% tin and 0.001% impurities. Tin in its pure form is used for tinning.

Zinc. Zinc is a brittle white metal with a bluish tinge. Zinc is used to coat products (galvanizing) to protect them from atmospheric corrosion.

Lead. This soft metal is bluish-gray color, rapidly fading in the air. Lead is cast and rolled well. From for pumping acids, for the production of batteries, etc. Lead is a very good protection against x-rays.

Aluminum. Aluminum is a soft white metal. It is produced by electrolysis from aluminum ore - bauxite and is well suited for rolling and forging. The features of aluminum are lightness, good electrical conductivity (60% copper conductivity) and high corrosion resistance. Aluminum produces wires, cables, coils (evaporators) in refrigerators, etc. Aluminum oxides are harmless.

Magnesium. Magnesium is the lightest metal of all used in engineering (its specific gravity is 1.74). It is easily ignited and when it burns, a high temperature occurs. The most dangerous in this respect are powder, thin tape, small shavings, etc. The mechanical properties of magnesium are low, so it finds limited application in engineering. In the foundry business of magnesium, high-strength magnesium cast iron is melted. Most often, magnesium is used in the form of alloys with aluminum, zinc.

Titanium. This metal is silvery-white, refractory (melts at 1725 ° C) and light, resistant to air and even in the atmosphere of the sea climate. In terms of prevalence, titanium ranks fourth among the structural metals, second only to aluminum, iron and magnesium. Its strength is twice that of iron, and almost six times greater than that of aluminum. Valuable properties of titanium are its high chemical and corrosion resistance. Titanium has a high plasticity. It is well forged, easily rolled into sheets, ribbons and even in foil. Titanium finds the greatest application in the form of alloys for the manufacture of blades of gas turbines and the production of heat-resistant steels.

Production
Our advantages
High quality products
System of continuous improvement is implemented at the company's enterprises.
Safety engineering
Group of actions of technical and organizational nature, oriented to creation of safe working conditions and prevention of accidents at work
Great experience
WUTMARC increases sales in strategic markets annually.
Quality control
Quality control is the main factor in the development of production WUTMARC. The factories of the company are equipped with modern equipment, which allow to control the quality of products at all stages of production.
Investment program as a strategic priority. In our business, investments play a critical role in determining the future of the Company. WUTMARC constantly invests in the development of production capacities, improving the quality of products and expansion of product range.
news
30 December 2017
Replacing your everyday gas guzzler with a hydrogen-fueled car could drastically reduce your carbon footprint. So why don't we all make the switch? One of reason is the expensive platinum catalyst required to operate hydrogen fuel cells efficiently.
29 August 2017
India's crude steel production grew 3.5 per cent to 8.36 million tonnes (MT) in July this year, says the latest report by World Steel Association.
25 August 2017
Backed by strong demand from China, flat steel producers who raised prices at the beginning of August by up to Rs 3,000, one of the steepest in recent times, are mulling an increase next month.
22 August 2017
SA’s steel production recovered by 7.6% in July to 493,000 tons from June’s 458,000 tons, but this still left steel output down 6.3% from a year ago, according to the World Steel Association.
17 November 2017
Working on the Ariel Hipercar project, Powdertech Surface Science has developed a process, that uses no adhesives, for bonding polypropylene glass fibre composite to aluminium for the vehicle’s monocoque chassis.
10 Martha 2018
As it did for many businesses, the Great Recession exposed Maysteel’s weakness. But today the Wisconsin custom fabricator has a renewed focus and is again on the growth path.
04 January 2018
Copper was trading in a tight range during Asian trading hours on Thursday January 4 amid mixed market sentiment following the release of the Federal Open Market Committee (FOMC) minutes overnight.
our branches